CasperSecurity
#
# parisc/Makefile
#
# This file is included by the global makefile so that you can add your own
# architecture-specific flags and dependencies. Remember to do have actions
# for "archclean" and "archdep" for cleaning up and making dependencies for
# this architecture
#
# This file is subject to the terms and conditions of the GNU General Public
# License. See the file "COPYING" in the main directory of this archive
# for more details.
#
# Copyright (C) 1994 by Linus Torvalds
# Portions Copyright (C) 1999 The Puffin Group
#
# Modified for PA-RISC Linux by Paul Lahaie, Alex deVries,
# Mike Shaver, Helge Deller and Martin K. Petersen
#
ifdef CONFIG_PARISC_SELF_EXTRACT
boot := arch/parisc/boot
KBUILD_IMAGE := $(boot)/bzImage
else
KBUILD_IMAGE := vmlinuz
endif
NM = sh $(srctree)/arch/parisc/nm
CHECKFLAGS += -D__hppa__=1
ifdef CONFIG_64BIT
UTS_MACHINE := parisc64
CHECKFLAGS += -D__LP64__=1
LD_BFD := elf64-hppa-linux
else # 32-bit
LD_BFD := elf32-hppa-linux
endif
# select defconfig based on actual architecture
ifeq ($(ARCH),parisc64)
KBUILD_DEFCONFIG := generic-64bit_defconfig
CC_ARCHES := hppa64
else
KBUILD_DEFCONFIG := generic-32bit_defconfig
CC_ARCHES := hppa hppa2.0 hppa1.1
endif
export LD_BFD
ifdef cross_compiling
ifeq ($(CROSS_COMPILE),)
CC_SUFFIXES = linux linux-gnu unknown-linux-gnu
CROSS_COMPILE := $(call cc-cross-prefix, \
$(foreach a,$(CC_ARCHES), \
$(foreach s,$(CC_SUFFIXES),$(a)-$(s)-)))
endif
endif
ifdef CONFIG_DYNAMIC_FTRACE
ifdef CONFIG_64BIT
NOP_COUNT := 8
else
NOP_COUNT := 5
endif
export CC_USING_RECORD_MCOUNT:=1
export CC_USING_PATCHABLE_FUNCTION_ENTRY:=1
KBUILD_AFLAGS += -DCC_USING_PATCHABLE_FUNCTION_ENTRY=1
KBUILD_CFLAGS += -DCC_USING_PATCHABLE_FUNCTION_ENTRY=1 \
-DFTRACE_PATCHABLE_FUNCTION_SIZE=$(NOP_COUNT)
CC_FLAGS_FTRACE := -fpatchable-function-entry=$(NOP_COUNT),$(shell echo $$(($(NOP_COUNT)-1)))
endif
OBJCOPY_FLAGS =-O binary -R .note -R .comment -S
cflags-y := -pipe
# These flags should be implied by an hppa-linux configuration, but they
# are not in gcc 3.2.
cflags-y += -mno-space-regs
# -mfast-indirect-calls is only relevant for 32-bit kernels.
ifndef CONFIG_64BIT
cflags-y += -mfast-indirect-calls
endif
# Currently we save and restore fpregs on all kernel entry/interruption paths.
# If that gets optimized, we might need to disable the use of fpregs in the
# kernel.
cflags-y += -mdisable-fpregs
# Use long jumps instead of long branches (needed if your linker fails to
# link a too big vmlinux executable). Not enabled for building modules.
ifdef CONFIG_MLONGCALLS
KBUILD_CFLAGS_KERNEL += -mlong-calls
endif
# Without this, "ld -r" results in .text sections that are too big (> 0x40000)
# for branches to reach stubs. And multiple .text sections trigger a warning
# when creating the sysfs module information section.
ifndef CONFIG_64BIT
KBUILD_CFLAGS_MODULE += -ffunction-sections
endif
# select which processor to optimise for
cflags-$(CONFIG_PA7000) += -march=1.1 -mschedule=7100
cflags-$(CONFIG_PA7200) += -march=1.1 -mschedule=7200
cflags-$(CONFIG_PA7100LC) += -march=1.1 -mschedule=7100LC
cflags-$(CONFIG_PA7300LC) += -march=1.1 -mschedule=7300
cflags-$(CONFIG_PA8X00) += -march=2.0 -mschedule=8000
head-y := arch/parisc/kernel/head.o
KBUILD_CFLAGS += $(cflags-y)
LIBGCC := $(shell $(CC) -print-libgcc-file-name)
export LIBGCC
libs-y += arch/parisc/lib/ $(LIBGCC)
boot := arch/parisc/boot
PALO := $(shell if (which palo 2>&1); then : ; \
elif [ -x /sbin/palo ]; then echo /sbin/palo; \
fi)
PALOCONF := $(shell if [ -f $(srctree)/palo.conf ]; then echo $(srctree)/palo.conf; \
else echo $(objtree)/palo.conf; \
fi)
palo lifimage: vmlinuz
@if test ! -x "$(PALO)"; then \
echo 'ERROR: Please install palo first (apt-get install palo)';\
echo 'or build it from source and install it somewhere in your $$PATH';\
false; \
fi
@if test ! -f "$(PALOCONF)"; then \
cp $(srctree)/arch/parisc/defpalo.conf $(objtree)/palo.conf; \
echo 'A generic palo config file ($(objtree)/palo.conf) has been created for you.'; \
echo 'You should check it and re-run "make palo".'; \
echo 'WARNING: the "lifimage" file is now placed in this directory by default!'; \
false; \
fi
$(PALO) -f $(PALOCONF)
BOOT_TARGETS = zImage Image palo lifimage
INSTALL_TARGETS = zinstall install
PHONY += bzImage $(BOOT_TARGETS) $(INSTALL_TARGETS)
# Default kernel to build
all: bzImage
zImage: vmlinuz
Image: vmlinux
bzImage: vmlinux
$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
ifdef CONFIG_PARISC_SELF_EXTRACT
vmlinuz: bzImage
$(OBJCOPY) $(boot)/bzImage $@
else
vmlinuz: vmlinux
@$(KGZIP) -cf -9 $< > $@
endif
install:
$(CONFIG_SHELL) $(srctree)/arch/parisc/install.sh \
$(KERNELRELEASE) vmlinux System.map "$(INSTALL_PATH)"
zinstall:
$(CONFIG_SHELL) $(srctree)/arch/parisc/install.sh \
$(KERNELRELEASE) vmlinuz System.map "$(INSTALL_PATH)"
CLEAN_FILES += lifimage
MRPROPER_FILES += palo.conf
define archhelp
@echo '* vmlinux - Uncompressed kernel image (./vmlinux)'
@echo ' vmlinuz - Compressed kernel image (./vmlinuz)'
@echo ' palo - Bootable image (./lifimage)'
@echo ' install - Install uncompressed vmlinux kernel using'
@echo ' (your) ~/bin/$(INSTALLKERNEL) or'
@echo ' (distribution) /sbin/$(INSTALLKERNEL) or'
@echo ' copy to $$(INSTALL_PATH)'
@echo ' zinstall - Install compressed vmlinuz kernel'
endef
archclean:
$(Q)$(MAKE) $(clean)=$(boot)
archheaders:
$(Q)$(MAKE) $(build)=arch/parisc/kernel/syscalls all